Pivot for Beginners

[Zed]

If you see any broken links or blank images in this tutorial, please either comment or PM me immediately so that I can get it fixed. Comment for preference, because that bumps this thing up the topic list :)

Once again, my tutorial has too many pictures for a single post. It will be spread over two.

The Pivot Beginner’s Tutorial

So you want to learn how to animate. Odds are, you want to get really good at it and make stuff like you’ve seen on Stickpage. The good news is, it’s not impossible, and this is definitely the place to start. The bad news is, it’ll take a bit of work. This tutorial is by no means everything that you need in order to become a veteran animator, but if you pay attention and absorb all the key points, it should get you to med beginner and making some pretty decent pivots. I have tried to be brief to avoid making a monstrously long tutorial that no one ever reads, so if you need anything clarified further PM me or ask below.

Download Pivot here: http://atlas.walagata.com/w/peterbone/Pivot.zip

Contents

1. Social Conduct
2. How Pivot Works
3. Movements
4. Easing
5. Stiffness
6. Physics
7. Saving and Uploading

Social Conduct

I’m going to get this out of the way first because it needs to be in here and it won’t flow properly once we start talking about the actual animations.

There are several important points about how you conduct yourself in the forums that are at least as essential as animating skill itself:

1. Use correct grammar and spelling.
2. Do not flame.
3. Do not bump.
4. Do not spam.
5. Do not double post. Edit.
6. Do not use racist language or stereotypes seriously.
7. Learn from your mistakes.
8. Get to 300 posts and ask Dudeman very nicely to change your name to something without “stick” in it.
9. Do not claim to be better than someone else.
10. Do not point out to someone else that they have broken one of these guidelines.

I could write a paragraph on each of those ten points explaining why but I would hope that it’s obvious. If not, just follow them blindly and you’ll probably get along fine. If you really desperately have an urge to double post then PM me and I can explain in full.

How Pivot Works

It’s pretty intuitive really. It’s one of the simplest animation programmes out there; that’s why it’s recommended for when you just start out.

The first thing you need to do when you open pivot is press delete (it’s on the grey bar to the left) and get rid of that damn base stick. It’s dreadful. Don’t animate with it, even if someone’s threatening you with an electrified dog poo on a stick.

The next step is to go to file -> create figure type. Now you create your own stick man by clicking on either the line or circle to the top left of the window, then clicking on the joint that you want the line or circle to come out of, then clicking again somewhere else when the line or circle is the size you want it. If you want to make a line thicker, you do so with the small arrows on the left. This is also the way to fill in a circle if you wish to do so.

You can make your sticks however you want. If you would like a template though, there are plenty of tutorials out there that will quite happily tell you that they know how to make the best stick figure in the world and everyone else’s is crap. Like this one (http://www.stickpageportal.com/forums/showthread.php?t=71723).

When you’re done, if you think you will want to use the stick again, press: file -> save; and save it. If you just want to use it this once then skip to step two which is pressing: file -> add to animation; and name it to put it into your animation. You can change the size once it’s in the animation with the numbers at the side.

Now you’re ready to start animating. It’s unimaginably simple. You use the dots to move your stick where you want him (the orange dot will move the entire stick and the red dots will rotate from a joint. The dots will be blue when you have a different stick selected). Then you press “next frame” to move to the next frame where you move the dots around some more. The frames will come together at 16.6 per second to create the illusion of movement. You can view your animation so far by pressing “play”. You can edit a previous frame by clicking on it at the top, moving the dots around again, and then pressing the “next frame” button again when you’re happy with it (if you don’t press “next frame” it won’t save the changes to that frame, so if you made a mistake and changed something by accident you can undo it by going to a different frame and coming back). If you want to delete a frame you can do so by right-clicking it in the bar at the top and pressing “delete”. If you want to insert a new frame you can right-click the frame after where you want it inserted and press “insert”.

Note: For a more in depth look at how pivot works, how to build a stick, and the general posting guidelines, view PC’s tutorial here. (http://www.stickpageportal.com/forums/showthread.php?t=15873) Don’t use it for the walk, run, or blood though, because, as much as I love PC, those sections leave a little to be desired.

Movements

The thing with movements in pivot is that you can’t just show the start and the finish and expect fluid motion to occur magically by some sort of osmosis. You must show all of the in-between stages too. It makes the difference between this:

http://img197.imageshack.us/img197/2314/shitwalking.gif

And this:

http://img269.imageshack.us/img269/5574/perfectwalk.gif

The first one only shows the places where the foot is finishing. Pivot doesn’t know you’re trying to walk – as far as it’s concerned you may be making a slide show. You have to tell it all the places along the way. Look at them frame by frame:

http://img268.imageshack.us/img268/1096/shittywalk1.png http://img132.imageshack.us/img132/2305/shittywalk2.png
http://img268.imageshack.us/img268/1096/shittywalk1.png http://img132.imageshack.us/img132/2305/shittywalk2.png

And:

http://img7.imageshack.us/img7/742/clipboard01k.gifhttp://img269.imageshack.us/img269/536/clipboard02j.gif
http://img8.imageshack.us/img8/9595/clipboard03c.gifhttp://img269.imageshack.us/img269/9250/clipboard04.gif
http://img190.imageshack.us/img190/5720/clipboard05y.gifhttp://img190.imageshack.us/img190/2336/clipboard06.gif
http://img20.imageshack.us/img20/679/clipboard07.gifhttp://img194.imageshack.us/img194/79/clipboard08.gif
http://img194.imageshack.us/img194/1345/clipboard09.gifhttp://img8.imageshack.us/img8/6237/clipboard10.gif
http://img21.imageshack.us/img21/548/clipboard11.gifhttp://img12.imageshack.us/img12/9858/clipboard12.gif

Ok?

Note: Don’t copy that walk. That’s not because I’m annoyed by copyright theft – if you want to pretend it’s your walk then do so (although most people here and some at darkdemon will recognise it) but the point is that you won’t learn anything. If you copied a Miccool animation frame by frame then you’d have a great animation but you could hardly claim to be as good as him, could you? If you want to learn to walk, go here: http://www.stickpageportal.com/forums/showthread.php?t=104748 (thread whoring ftw)

Foot placement (Section added 24/10/09)
One other thing which I left out originally and can just about be forced into the "movement" category if you close your eyes and concentrate is foot placement. Basically, this means that, unless you're on a deliberately slippery surface, any part of the stick that is in contact with the floor must remain in exactly the same place on the floor otherwise it looks wrong.

The exceptions to this are when you want to show camera movement or a slippery floor in which case the foot placement should slide very regularly. Slippery floors are very complex - you need to get the momentum just right. See "physics" below for information on momentum. It is recomended that you stay away from these until you've developed your own style and have some experience of all the basics. Camera movements are ok if you keep them regular. A looped walk like the one above uses a simple camera movement. The foot slides back by the same ammount in each frame.

[Zed]

Easing

Easing is acceleration and deceleration. In pivot this involves moving something very little in the first frame, a bit more in the second, even more in the third, etc. Almost every movement that you will ever do should be eased. The exceptions are – when something bumps into something solid such as a wall or floor; bullets out of a gun; bounces, where the object should leave the ground at maximum speed, although it then eases at the top and on the way down.

MaxZ’s example of easing (thanks):

http://i43.tinypic.com/2vuggea.gif

And my representation:

Eased:

http://img190.imageshack.us/img190/2875/eased.gif

Uneased:

http://img190.imageshack.us/img190/6435/uneased.gif

Easing is one of the most important things to learn. It will come naturally after a bit of practice, but it is absolutely essential in order to make a half-decent animation. Look at the difference it makes here:

Eased:

http://i771.photobucket.com/albums/xx353/Zed31415/EasedCrouch.gif

Uneased:

http://img43.imageshack.us/img43/8152/uneasedcrouch.gif

For a more detailed look at easing, see here: http://www.stickpageportal.com/forums/showthread.php?t=109861


Stiffness

Stiffness is when a part of the body isn’t moving enough – usually not at all. The standard advice is to move every joint in every frame, and it’s good advice. Do it. Stiffness is very easy to fix once you’ve spotted it, so very little more needs to be said here. I’ll add a couple of animations as filler.

Stiff:

http://img269.imageshack.us/img269/6234/wavingstiffly.gif

Not so stiff:

http://img216.imageshack.us/img216/7613/waving.gif

There. Don’t they look nice? Would they still look nice if I told you that he isn’t waving, he’s beating his ho, the white stick, to death? Didn’t think so.


Physics

The Newtonian laws of motion are the most important. Essentially, things don't just stop or change direction - if a guy is jumping through the air he cannot instantly lose all horizontal momentum and come back to the ground. Gravity is the other important one; it is covered by easing. Physics is only really important when things are in the air. The following examples are all done with balls but they apply to anything at all off the ground.

In a horizontal throw, the ball should be at a constant speed relative to the ground, like this:

http://img269.imageshack.us/img269/4433/constantspeed.gif

This should be combined with the vertical axis which will look like this with the ball at maximum velocity as it leaves the start, eased into the top of the throw, and then stopping suddenly at the bottom. After the stop it will bounce:

http://img269.imageshack.us/img269/7061/easedbounce.gif

The overall effect is something like this:

http://img269.imageshack.us/img269/589/bouncebackandforth.gif

An example of the physics of a horizontal throw:

http://img268.imageshack.us/img268/5826/thrownfade.gif

Little bit rushed. Just imagine that the ball's made of iron which is why it doesn't bounce much and the stickman's been throwing it around all day so that's made him stiff.

When things fall, they start off slowly and gradually accelerate until they hit the ground at which point the stop and start moving in the opposite direction at maximum speed. The will then gradually slow down until they reach the top of the bounce and then the process starts again:

http://img41.imageshack.us/img41/6928/balldropandbouncedemo.gif

The blue one is correct. The red one is not.

Note: for a more detailed look on physics with relation to pivot, see here: http://www.stickpageportal.com/forums/showthread.php?t=30327
For a more detailed look at physics in general, see here: http://www.stickpageportal.com/forums/showthread.php?t=106581


Saving And Showing

If you want to change the speed, look here (second post): http://www.stickpageportal.com/forums/showthread.php?t=106316

When you’re done, to show us your animations follow this: http://www.stickpageportal.com/forums/showthread.php?t=36183

And then post your first animation under "community animations" -> "pivot" -> "beginners post your pivot animations here".

Remember, it’s not worth showing every one of your animations – only post those that you think are good enough. At the time of writing, my Thread contains 21 animations, including 3 put in for sentimental value. My animations file on my computer contains 86.


And Finally…

When you’ve mastered all of this and you want to know where to go next, I can think of no better all-in-one tutorial than this (credz to Baha and DarkDemon): http://www.stickpageportal.com/forums/showthread.php?t=106185 which actually goes over most of what I have put here anyway but I think it is a bit briefer, plus it doesn’t have all the links to other tuts that go into more detail so your time reading this hasn’t entirely been wasted.

Thank you for spending that time, by the way. I would welcome any comments or questions you have, or any ways that you think this could be improved.

[Rival]

Great tut as always, though this will probably only help beginners who are DRAMASTICALLY bad.

[Zed]

That's certainly what I'm hoping. On balance it'll probably be less effort to send them here than to give them each individual cc, wheras the med/high beginners usually need something specific.

[kingsmash]

nice tut zed this will help a lot of beginners out with what they need to know about some of the basics

[pheonixslayer21]

lol long ass posts as always, great tut zed, hopefully this will help with less crap animations in the beginners section :3

[Rival]

That's certainly what I'm hoping. On balance it'll probably be less effort to send them here than to give them each individual cc, wheras the med/high beginners usually need something specific.


The only problem: beginners usually don't read too long posts, even if it helps alot.

[Zed]

Weeeeeelllllllll. That's 'cos u smell.

Maybe one or two will, and if I can get through to just one person, doesn't that make this whole thing worth while?

[Rival]

But then you could have given him "individual cc".
Bang bang, that awfull sound, Bang bang, I shot you down, bang bang... Invisi war is going on xD The line is wrong Killbill
And I don't smell bitch!

[LivingShadow]

Ive made a couple "ok" pivot videos and im a begginer if any 1 wants to check them out please contact me or something and il try to figure out how to send it to you xD (ps this helped alought I never knew about stiffness and stuff)

[likwid_Metal]

This is a no no. don't comment on someones thread advertising your own videos unless you want a bunch of pissed off people. i suggest not doing it again.

[Rival]

http://img41.imageshack.us/img41/6928/balldropandbouncedemo.gif

I think the blue ball isn't quite real. The second bounce should have less easing.

[Zed]

You may well be right. Whenever I can be bothered I shall look into doing something about it.

[Rival]

I just noticed: you joined in februari and already have 3000+ posts

And they say I spam....

[Devour]

Febuary to now = 8 months. Enough said.

Also, this is a good tutorial. The thing is that most 9-12 year old people who need to see this wont read something with that many big words, or something thats that long.

[Zed]

Yeah, that's the trouble with all my tuts. I tried to keep this one brief but there was just so much stuff that needed to be said. It would almost be worth having an entire section of the forum dedicated towards tutorials for beginners.

[punkmaffles]

thanks Zed that actually helped with the easing and the grav probs now to practice them guess i should either start with a walk or bounce

[CronosXIII]

Your all spam whores. Just take your sweet time like me.

... +1 post!!11one!!evlee1!

+1 for contradiction

+1 If you dont know what that means

-1 I'm trying to hard

[Rival]

We chat. Social. Fun. Yay to do. ^-^ feeling.

'k?

Postcount +1

[Kieran.]

Well done young Zedling.

[mexicanhitman]

i didnt really think about the stiffness thing :heh: :Bricked:

[Supermeatloaf666]

thanks for the info i will use it

[Hiccups]

This tut was exceptionally helpful to me. Your examples were very entertaining.

[Moch12]

This TuT I think Is Dramatically Helpful
how do you double frame I cheked out a tut and I dont think I t worked to good for me D:

[Coldzero]

Another Nice tut. Once again congratulations.

[Zed]

This TuT I think Is Dramatically Helpful
how do you double frame I cheked out a tut and I dont think I t worked to good for me D:

Double framing is just not changing anything for one frame. Sometimes it can add power if you do it just as a punch connects, etc. because it highlights the moment. It'll come with practice (I hope).

[triardy09]

Based on the valuable contributions of more-experienced modders Ive put together a step-by-step tutorial. Sometimes its better to learn from beginners, who are more keenly aware of the obstacles beginners face. If anything isnt clear enough, please complain. For more advanced topics try one of the more advanced modders.See the attached PDF file.

[Zed]

There is no attached file. You may need twenty posts. If so, just edit your above post and add it in and the system won't notice.

[Coldzero]

Cheating with death aint as easy as you think.

[kulot911]

? is this ok its just a really short onehttp://img402.imageshack.us/edit_preview.php?l=img402/7273/new1z.gif&action=rotate

[Zed]

The camera and cinematic effects are good. So's the blood, although I suspect you downloaded it. I'd say the biggest issue with this is that it's lacking in movement. Very few things actually happen. You might find trying simpler stuff helps with this. It could use some longer cutscenes too to avoid confusion for the viewer and more easing. Not a bad fist attempt though.

I recommend you go to the community animations section and post your work in the pivot section in the future, in the "beginners post your animations here" thread.

[mechanical stick]

Zed, you're f***ing amazing man.

I bet someone's gonna make a sig out of that

I can't really animate anymore, because my computer got slower. We changed to Hughes Net because we moved, and dont get comcast or whatever. For some reason, the internet is slowing down the whole computer. I can still animate, but it takes a while and is really annoying

[Zer0 Iq]

Seems like a good tut, but thats coming from a newcomer to both this forum and pivot so yeah. :Happy:

[ReYAndresf]

Thanks alot Zed you really did help me ^^

Yupih for you!

[xdanieltanx]

nice tut,Zed,u reli helped me

[sticksith]

I love you Zed...